5
Function menu
1. OUTPUT SELECT menu
■ＯＵＴＰＵＴ ＳＥＬＥＣＴ ＜＞
４Ｋ ＯＵＴＰＵＴ ：２ＳＩ［Ａ］
４Ｋ ＣＯＬＯＲ ：ＢＴ．７０９
ＨＤ１［１／２］
：１０８０ｉ
ＨＤ２［１／２］
：１０８０ｉ
ＷＦＭ／ＰＩＸ ：１０８０ｉ
ＨＤ４［１／２］
：１０８０ｉ
ＣＵＴ－ＯＵＴ ＰＯＳＩＴＩＯＮ
Ｈ ＰＨＡＳＥ ： ０
Ｖ ＰＨＡＳＥ ： ０
ＨＤ ＦＩＬＴＥＲ ：ＭＩＤ ＬＯＷ
Item
Setting
Factory setting
Description
SYS FORMAT
59.94, 50.00
29.97, 25.00,
23.98
59.94, 50.00
29.97, 25.00,
23.98
4K OUTPUT
SQD[B], 2SI[B],
SQD[A], 2SI[A]
SQD[QUAD],
SQD[DUAL],
2SI[DUAL]
2SI[A]
2SI[DUAL]
Assigns output signal of 4K OUTPUT
connector. (*1)
SQD: Square division
2SI: 2-Sample Interleave division
A/B: SMPTE425M Level-A/B
QUAD/DUAL: Mapping link
4K COLOR
BT.709, BT.2020
BT.709
Sets the color matrix for 4K output only.
HD1[1/2]
1080p, 1080i,
720p,
CUT-OUT[p],
CUT-OUT[i]
1080p, 1080i,
1080PsF, 720p,
CUT-OUT
1080i
1080i
Assigns signal of HD1[1/2] connector.
HD2[1/2]
Assigns signal of HD2[1/2] connector.
HD4[1/2]
Assigns signal of HD4[1/2] connector.
WFM/PIX
1080p, 1080i,
720p
1080p, 1080i,
1080PsF, 720p
1080i
1080i
Assigns output signal of WFM/PIX
connectors.
CUT-OUT
POSITION
Specifies the position of HD screen cut
from 4K screen, when CUT-OUT signal
is selected on HD1, 2, 4.
H PHASE
-120 to +120
0
Specifies horizontal phase.
V PHASE
-135 to +135
0
Specifies vertical phase.
HD FILTER
HIGH, MID HIGH,
MID LOW, LOW
MID LOW
Changes frequency of low-pass filter for
HD down-converter.
2. HDR/SDR menu
■ＨＤＲ／ＳＤＲ ＜＞
４Ｋ ＯＵＴＰＵＴ ：ＳＤＲ
＊ＨＤ ＯＵＴＰＵＴ ：ＳＤＲ
ＨＤＲ ＳＥＬＥＣＴ ：ＨＬＧ６００
－ＨＤ ＳＤＲ－
＊ＧＡＩＮ ： ０．０ｄＢ
＊ＢＬＡＣＫ ： ０
ＫＮＥＥ／ＣＬＩＰ ：＞
Item
Setting
Factory
setting
Description
4K OUTPUT SDR, HDR
SDR
Sets SDR/ HDR for 4K output.
HD OUTPUT
Note-1
SDR, HDR
SDR
Sets SDR/ HDR for HD output.
HDR SELECT HLG600,
HLG1200,
HPQ
HLG600
Sets HDR curve.
HD SDR
GAIN
0.0 to -18dB,
0.1 steps
0dB
Adjusts SDR signal level only when
setting simultaneous SDR and HDR
output.
BLACK
-128 to 127
ON
Adjusts BLACK level of SDR signal
only when setting simultaneous SDR
and HDR output.
KNEE/CLIP
Moves to KNEE/CLIP (HD) menu.
Note-1
When selecting SDR as the 4K signal output mode, HDR is NOT
AVAILABLE on the HD outputs.
