HITACHI Deskstar & CinemaStar 7K1000.B & Deskstar E7K1000 Hard Disk Drive specification
3
2.0
General features
Data capacities of 160 GB - 1000 GB
Spindle speeds of 7200 RPM
Fluid Dynamic Bearing motor
Serial ATA interface
Sector format of 512 bytes/sector
Closed-loop actuator servo
Load/Unload mechanism, non head disk contact start/stop
Automatic Actuator lock
Interleave factor 1:1
Seek time of 14 ms(1D) / 8.5 ms(2D/3D) typical without Command Overhead
Sector Buffer size of 8192 KB(1D/2D) / 16384 KB/32768 KB(2D/3D)
(Upper 1134 KB(8MB) / 1382 KB(16MB)/ 1879 KB(32MB) are used for firmware)
Ring buffer implementation
Write Cache
Native command queuing support
Advanced ECC On The Fly (EOF)
Automatic Error Recovery procedures for read and write commands
Self Diagnostics on Power on and resident diagnostics
Serial ATA Data Transfer 3Gbps
CHS and LBA mode
Power saving modes/Low RPM idle mode (APM)
S.M.A.R.T. (Self Monitoring and Analysis Reporting Technology)
Support security feature
Quiet Seek mode (AAM)
48 bit addressing feature
Adaptive Zone Formatting
SATA 2.6 compliant