--- 26 ---
Fig. 14
Change Lever
[14]
Pushing Button
[12]
(4) Disassembly of the tool retainer
Slide the Grip
[3]
fully in the arrow direction as shown in Fig. 15 and remove the Front Cap
[1]
. Pulling the
Grip
[3]
as shown in Fig. 16, remove the Stopper Ring
[2]
with a retaining ring puller. Then the Grip
[3]
, Ball
Holder
[4]
, Steel Ball D7.0
[21]
, Holder Plate
[5]
, Holder Spring
[6]
and Washer (B)
[7]
can be removed from
the Cylinder
[22]
.
Front Cap
[1]
Stopper Ring
[2]
Ball Holder
[4]
Holder Plate
[5]
Holder Spring
[6]
Washer (B)
[7]
Grip
[3]
Fig. 16
Steel Ball D7.0
[21]
Grip
[3]
Fig. 15
(5) Disassembly of the cylinder and the second gear (slip mechanism section)
Remove the Gear Cover
[10]
from the Inner Cover
[39]
and remove the entire tool retainer. Remove the
Retaining Ring for D20 Shaft
[8]
with a retaining ring puller. Stand the Gear Cover
[10]
in this state and pull
out the Cylinder
[22]
from the Gear Cover
[10]
with a hand press. Then the Sleeve
[17]
can be removed from
the Cylinder
[22]
. Remove the Retaining Ring For D30 Shaft
[26]
from the Cylinder
[22]
with a retaining ring
puller. Then the Second Gear
[23]
, Spring (A)
[24]
and Washer (A)
[25]
can be removed from the Cylinder
[22]
.
Summary of Contents for DH 24PD2
Page 26: ... 23 Fig 10 Dust collector B structure ...
Page 44: ......
