-18-
Remove Seal Lock Hex. Socket Hd. Bolt M6 x 20
[7]
from Cylinder Case
[8]
and then separate Cylinder
Case
[8]
, Cylinder
[21]
, and other assembly parts from Crank Case
[104]
. Demount Clutch
[33]
and Clutch
Spring
[32]
from the assembly parts.
Push out Cylinder
[21]
from the front end. You can then separate the assembly parts (Cylinder
[21]
,
Second Hammer
[23]
, Striker
[30]
, Slide Sleeve
[19]
, Lock Sleeve
[17]
, Lock Spring
[16]
, Ball Bearing
6905DDUCMNS7S
[14]
, etc.) from Cylinder Case
[8]
.
Cylinder Case
[8]
Cylinder
[21]
Clutch
[33]
Clutch Spring
[32]
Cylinder
[21]
Second Hammer
[23]
Striker
[30]
Slide Sleeve
[19]
Lock Sleeve
[17]
Lock Spring
[16]
Ball Bearing 6905DDUCMNS7S
[14]
Felt Packing (A)
[13]