--- 5 ---
5-2. Optional Accessories
A. Drilling anchor holes (ro hammering)
(1) Drill bit (Taper shank)
Outer dia. (mm)
11
(7/16")
12.3 (1/2")
12.7 (1/2")
14.3 (9/16")
14.5 (9/16")
17.5 (11/16")
Code No.
944460
944461
993038
944462
944500
944463
(2) Taper shank adapter
Type
Code No.
Morse taper
No. 1
303617
(3) Cotter
Code No.
944477
+
(1) Drill bit (taper shank)
(2) Taper shank adapter
(SDS-plus shank)
Drill bit (taper shank)
21.5 (7/8")
944464
Morse taper No. 2
303618
(3) Cotter
303619
303620
Taper shank adapters (A-taper or B-taper) is provided as an
optional accessory, but drill bit is not provided.
A-taper
B-taper
Code No.
Part name
B. Anchor setting (hammering only)
Anchor setting adapter (SDS-plus shank)
Part name
W-1/4 Anchor setting adapter-A
W-5/16 Anchor setting adapter-A
W-3/8 Anchor setting adapter-A
W-3/8 Anchor setting adapter-A
Code No.
302976
302975
303621
302974
Anchor setting bar to permit anchor setting operation with the rotary hammer
Overall length
260
260
160
260
Part name
W-1/4 Anchor setting adapter-B
W-5/16 Anchor setting adapter-B
W-3/8 Anchor setting adapter-B
W-3/8 Anchor setting adapter-B
Code No.
302979
302978
303622
302977
Overall length
260
260
160
260
Internal cone type
External cone type
Anchor setting bar for manual anchor setting
Anchor setting adapter
+
Part name
W-1/4 Anchor setting adapter-A
W-5/16 Anchor setting adapter-A
W-3/8 Anchor setting adapter-A
W-1/2 Anchor setting adapter-A
W-5/8 Anchor setting adapter-A
Code No.
971794
971795
971796
971797
971798
Part name
W-1/4 Anchor setting adapter-B
W-5/16 Anchor setting adapter-B
W-3/8 Anchor setting adapter-B
W-1/2 Anchor setting adapter-B
W-5/8 Anchor setting adapter-B
Internal cone type
External cone type
Code No.
971799
971800
971801
971802
971803
Anchor setting bar