--- 17 ---
(4) Disassembly of the gear unit
Remove the Shift Arm
[17]
from the Rear Case
[15]
, then remove the four Screw Sets D3 x 12
[16]
connecting
the Front Case
[9]
and the Rear Case
[15]
. Remove Washer (A)
[14]
, Planet Gear (C) Set
[13]
, Ring Gear
[12]
, six Steel Balls D5
[11]
and the six Rollers
[10]
from the Front Case
[9]
in order. Take care not to lose the
six Rollers
[10]
and the six Steel Balls D5
[11]
in this operation.
(5) Removal of the Spring
[6]
and Washer (D)
[7]
Turn the Nut
[5]
counterclockwise and remove it from the Front Case
[9]
, then remove the Spring
[6]
and
Washer (D)
[7]
from the Front Case
[9]
.
(Note) Do not remove the Front Case
[9]
.
(6) Disassembly of the power supply unit
(Note) Do not remove the fin secured to the DC-Speed Control Switch
[35]
with a screw.
Remove the two Machine Screws M3 x 8
[30]
, and take the Motor
[26]
and the Motor Spacer
[25]
apart.
Disconnect the Internal Wires
[33]
[34]
from the Motor
[26]
with a soldering iron, then disconnect them from
the DC-Speed Control Switch
[35]
with a soldering iron in the same manner.
Fig. 4
Hexagonal bar wrench
Shift Arm
[17]
Special repair tool (J-292)
Vise
Special Screw (Left Hand) M5 x 27
[1]
Drill Chuck 10TLRD-N
(W/O Chuck Wrench)
[2]
Cap
[4]
Front Case
[9]
Slide Ring Gear
[18]
Rear Case
[15]
Summary of Contents for DS 12DVF2
Page 32: ... 4 ITEM NO CODE NO DESCRIPTION REMARKS NO USED 3 04 DS 14DVF2 Printed in Japan 040305N ...
Page 36: ... 4 ITEM NO CODE NO DESCRIPTION REMARKS NO USED 3 04 DS 12DVF2 Printed in Japan 040305N ...
Page 40: ... 4 ITEM NO CODE NO DESCRIPTION REMARKS NO USED 2 04 DS 9DVF2 Printed in Japan 040205N ...
Page 41: ......
