--- 20 ---
(b) Mount the Nut
[5]
to the Front Case
[9]
. (See Fig. 9.)
Align the register mark (o) on the Nut
[5]
with the register mark on the Front Case
[9]
. Turn the Nut
[5]
about 1-1/4 turns clockwise so that the register mark (oo) on the Nut
[5]
is aligned with the register mark on
the Front Case
[9]
. Check that the Z surface of the Nut
[5]
is aligned with the Z surface of the Front Case
[9]
.
Fig. 9
Mounting start position
Mounting end position
Register mark (o)
Register mark
Register mark (oo)
Z surface
Z surface
Register mark (oo)
Register mark
Register mark (o)
Z surface of Nut
[5]
Z surface of Front Case
[9]
[5]
[9]
[5]
[9]
(3) Reassembly of the gear unit
(a) Apply grease (Hitachi Motor Grease No. 29, Code No. 930035) to the meshing parts of the gear.
(b) Install the parts series from the six Rollers
[10]
to Washer (B)
[24]
into the assembly reassembled in step
(2). (See Fig. 10.)
(i) Note the direction of the groove when installing the Slide Ring Gear
[18]
so that the groove faces toward
the Motor
[26]
.
(ii) Install the Front Case
[9]
and the Rear Case
[15]
together with the mark on the Front Case
[9]
aligned
with the mark on the Rear Case
[15]
. (See Fig. 13.)
Fig. 10
[9]
[20]
[19]
[18]
[14]
[13]
[12]
[11]
[10]
[24]
[23]
[21]
[22]
[16]
[15]
Groove
Summary of Contents for DS 12DVF2
Page 32: ... 4 ITEM NO CODE NO DESCRIPTION REMARKS NO USED 3 04 DS 14DVF2 Printed in Japan 040305N ...
Page 36: ... 4 ITEM NO CODE NO DESCRIPTION REMARKS NO USED 3 04 DS 12DVF2 Printed in Japan 040305N ...
Page 40: ... 4 ITEM NO CODE NO DESCRIPTION REMARKS NO USED 2 04 DS 9DVF2 Printed in Japan 040205N ...
Page 41: ......
