Hints and Tips
If a problem does occur, it may often be due to something very minor. The following table
contains various tips.
Menu
Description
No power.
•
Ensure the mains plug is connected.
•
Make sure that the unit is turned on.
•
Make sure that you have selected ON mode.
The remote
control does
not function.
•
Use the remote control near the unit.
•
Point the remote control at the remote sensor on the unit.
•
Replace the battery in the remote control with a new one.
•
Remove any obstacles between the remote control and the unit.
Very little or
no sound is
coming from a
DVD.
•
Make sure the unit is not paused. Press the PLAY/PAUSE button
on the unit or the remote control.
•
Make sure the unit is not in fast-forward or fast-reverse mode.
Press the PLAY/PAUSE button on the unit or the remote
control.
•
Make sure the AUDIO/VIDEO input/output connections are
correct.
•
This unit does not support DTS audio decoding system. Press the
AUDIO/ANGLE button on the remote control to change the audio
setting to 2-Channel Analogue mode.
•
The unit has overheated. Shut it off for 30 minutes to allow it to
cool down.
•
The volume control is too low. Increase the volume.
No picture.
•
The region number of the disc doesn’t match the region number
of this unit.
The picture is
not clear.
•
The DVD is dirty. Gently clean the disc.
•
The disc is scratched.
Loud hum or
noise is heard.
•
The plugs and sockets are dirty. Wipe them with a cloth slightly
moistened with alcohol.
•
Clean the disc.
•
The disc is scratched or the file is corrupt.
The disc does
not play.
•
There is no disc inside the unit (“No Disc” appears on the screen).
•
Insert the disc correctly with the graphics facing up.
•
Clean the disc.
•
A non-valid disc has been inserted, or the disc region number
does not match the region number of the unit.
•
Condensation may have formed inside the unit due to a sudden
change in temperature. Wait about an hour for it to clear and try
again.
30
GB
DV-P455E_IB_GB_120530_Zell.indd 30
30/05/2012 4:33 PM
