10
Set
ting up
Change the settings if your television is:
≥
Widescreen (16:9 aspect ratio)
≥
Progressive
– Read your television’s operating instructions for details.
1
Press [SETUP] to show the menus.
2
Press [
3
,
4
] to select “TV Screen”
and press [
1
].
3
Press [
3
,
4
] to select “TV Type” and
press [ENTER].
4
Press [
3
,
4
] to select the item and
press [ENTER].
≥
If you select a progressive output (480P) item, select Video
in the on-screen menu and set “Transfer” to suit the material
(
➜
page 38).
To return to the previous screen
Press [RETURN].
When you are finished
Press [SETUP].
∫
Regarding Progressive Television Picture
Progressive image aspect (height to width ratio) is set at a standard
16:9. DVD-Video which has been set at 16:9 will be displayed cor-
rectly. However, 4:3 video material will be stretched to the right and
left when displayed.
≥
To view the picture at the right aspect
– For televisions that allow the aspect of progressive images to
be adjusted, use the function provided on the television and
adjust as necessary.
– For televisions which do not allow the aspect of progressive
images to be adjusted, please set “Progressive” to “OFF” (
➜
page 38).
[Note]
≥
If the unit is connected to the TV through VIDEO OUT or S-
VIDEO OUT, output will be interlace only (even if you select pro-
gressive output).
≥
When progressive output is on, closed captions can not be dis-
played.
You can control televisions by entering the remote control code.
Press and hold [
Í
, POWER TV] and enter the
two-digit code with the numbered buttons.
e.g., 01: press [0]
➜
[1].
Code No. and Manufacturer
≥
Test by turning on the television and changing channels. Repeat
the procedure until you find the code that allows correct operation.
[Note]
≥
Point the remote control at your television, and press the buttons
on it: [
Í
, DVD POWER], [INPUT SELECT](TV), [
W
,
X
, CH](TV),
[
r
,
s
, VOLUME], numbered buttons (1-9, 0, 100) to check
whether they will operate the television.
If they do not work, use the remote control provided with the tele-
vision.
≥
If the manufacturer of your television uses multiple code numbers,
choose the number at which the TV volume control can be oper-
ated correctly.
≥
If the remote control does not correctly operate the television
even after the manufacturer code number is properly set, use the
remote control provided with the television to operate it.
∫
Operation
Point the remote control at the television.
OPEN/CLOSE
SETUP
ERASE
F Rec
POSITION MEMORY MARKER
AUDIO
INPUT SELECT
CM SKIP
STATUS
FRAME
DISPLAY
STOP
PAUSE
PLAY
DVD
VCR Plus+ TV/VIDEO REC MODE REC
CH
VOLUME
TV
TV
DVD
1
2
3
7
8
9
0
100
4
5
6
SLOW/SEARCH
SKIP
DIRECT NAVIGATOR
TOP
MENU
MENU
RETURN
FUNCTIONS
PROG/CHECK
TIME SLIP
ADD/DLT
ENTER
PLAY LIST
CANCEL
POWER
Í
Í
SETUP
Í
, POWER TV
DVD, TV
W
,
X
, CH
r
,
s
, VOLUME
RETURN
INPUT
SELECT
TV/VIDEO
3
,
4
,
2
,
1
ENTER
Numbered
buttons
TAB
SELECT
Antenna System
Auto Channel Setting
Channel Caption
Preset Channel Caption
Manual Channel Caption
VCR Plus
E
CH Setting
CATV
Channel
SETUP
RETURN
Set Up
Disc
Video
Audio
Display
TV Screen
TAB
SELECT
4:3 TV Settings for DVD-Video
TV mode(4:3)
Letterbox
Pan&Scan
SETUP
RETURN
Set Up
Disc
Video
Audio
Display
TV Screen
4:3 TV Settings for DVD-RAM
TV Type
ENTER
Channel
4:3 (480I)
SETUP
Set Up
Disc
Video
TV Type
Aspect 4:3 & 480I
Aspect 4:3 & 480P
Channel
Aspect 16:9 & 480P
Aspect 16:9 & 480I
Television operation
01
Panasonic/National QUASAR
11
JVC
02
12
HITACHI
03
MAGNAVOX SYLVANIA
PHILIPS (RC-5)
13
MITSUBISHI
04
ZENITH
14
SAMSUNG
05
THOMSON RCA GE
15
GOLDSTAR/LG
06
SHARP
16
07
17
08
SONY
18
SAMSUNG
09
TOSHIBA
19
10
SANYO FISHER
–
Operation
Button
On and off
[
Í
, POWER TV]
Video input mode
[TV/VIDEO]
Channels
(Switch [DVD, TV] to “TV”.)
[
W
,
X
, CH] or
Numbered buttons
e.g., Channel “5”: [0]
➜
[5]
Volume
[
r
,
s
, VOLUME]
STEP
5
Set up to match your television
