147
A
dd
itio
na
l In
fo
rm
at
io
n
*1
•
This message may also appear if the disc is dirty. If this message appears when a recorded disc is
recognised immediately after it is inserted, do not repair the disc; remove it and then use the
provided disc cleaning cloth to clean off the dirt before using it.
•
This message may also appear when condensation occurs. In this case, do not repair the disc; turn
the camcorder off, wait until it dries out, and then turn it on again.
•
If the repair message appears when you turn the camcorder on from off with a disc loaded after
recording on it, choose repair.
•
If the repair message appears when recording and playback are normally possible with another disc
– and no condensation has occurred, and the disc is not dirty – choose repair.
*2
•
This message may also appear if the disc is dirty. In this case, do not format the disc. Remove it and
then use the provided disc cleaning cloth to clean off the dirt before using it.
•
This message may also appear when condensation occurs. In this case, do not format the disc; turn
the camcorder off, wait until it dries out, and then turn it on again.
•
Formatting will delete all data on the disc.
*3
•
This message may also appear when the disc is dirty. Remove the disc and then use the provided
disc cleaning cloth to clean off the dirt before using it.
•
This message may also appear when condensation occurs. Wait until the camcorder dries out, and
then turn it on again.
*4
•
This message will appear when a single-sided disc is inserted the wrong way (upside down).
Reinsert the disc correctly. (Insert the disc with the label printed surface facing toward the outside.)
*5
•
Do not insert a DVD-RW (VF mode)/DVD-R disc that has not been finalised into any DVD
recorder. The disc may become unusable.
Write protected.
Check card.
A card with the erase prevention switch locked is
inserted. Unlock the switch.
40
Write protected.
Check HDD/disc.
The HDD or disc is write-protected. Use the disc
navigation menu to release the protection.
113
Message
Cause & Troubleshooting
Reference
page