2
Important Information
For Your Safety
The power switch turns the camcorder on and off, leaving the date/time feature unaffected. If the
camcorder is to be left unattended for a long period of time, turn it off.
The DVD video camera/recorder and AC adapter/charger have the following caution marks.
The camcorder and AC adapter/charger
have the following caution marks.
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT OPEN.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Identifications of caution marks
Precautions
WARNING:
Many television programmes and
films are copyrighted. In certain circumstances,
copy-right law may apply to private in-home
videotaping of copyrighted materials.
WARNING:
To prevent risk of injury or damage
to your camcorder and the AC adapter/charger,
use only the DZ-BP14S/DZ-BP14SW/DZ-
BP21SW battery and DZ-ACS3 (E) AC adapter/
charger.
Avoid using and storing the battery pack in
places subject to direct sunlight, high
temperatures, or near a flame source.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING:
DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED. REPLACE ONLY WITH
THE SAME OR EQUIVALENT TYPE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol warns the user that
uninsulated voltage within the unit
may have sufficient magnitude to
cause electric shock. Therefore, it is
dangerous to make any kind of
contact with any inside part of this
unit.
This symbol alerts the user that
important literature concerning the
operation and maintenance of this
unit has been included. Therefore, it
should be read carefully to avoid any
problems.
The liquid crystal display (LCD) panel is
made by highly precise technology. More
than 99.99% of its picture elements (pixels)
are effective, but some (less than 0.01%)
may appear as coloured bright dots. This
does not indicate a fault as the LCD panel
stretches the limits of current technology.
CLASS 1
LASER PRODUCT
CAUTION
This product contains a laser diode of
higher class than 1. To ensure continued
safety, do not remove any covers or attempt
to gain access to the inside of the product.
Refer all servicing to qualified personnel.
