6 - 40
Adjustment > Adjustment Procedure
5) Use the same procedure as in step 3) to
equalize levels c and d of the waveform.
6) After step 5) is complete, be sure to click the
NEXT button.
7) Connect the oscilloscope CH1 to “LCD-B
(pin 12)” of Halcyon connector.
8) Use the same procedure as in step 3) to
equalize levels a and b of the waveform.
(See Fig. 6-4-11)
9) After step 8) is complete, be sure to click the
NEXT button.
10) Use the same procedure as in step 3) to
equalize levels c and d of the waveform.
11) After step 10) is complete, be sure to click
the SAVE button.
12) Click the OK button in dialog to restore the
LCD ADJUSTMENT MENU screen.
13) Click the RETURN button in LCD
ADJUSTMENT MENU to restore the
ADJUST MENU screen.
SUB BRIGHT RED ADJUSTMENT screen.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
NEXT
RETURN
SUB BRIGHT RED ADJUSTMENT
UP
DOWN
CONNECTION
6
5
SUB BRIGHT BLUE ADJUSTMENT
screen.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
SAVE
RETURN
SUB BRIGHT BLUE ADJUSTMENT
UP
DOWN
CONNECTION
11
10
SUB CONTRAST BLUE ADJUSTMENT
screen.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
NEXT
RETURN
SUB CONTRAST BLUE ADJUSTMENT
UP
DOWN
CONNECTION
9
8
ADJUSTMENT FINISHED dialog
FINISHED
ADJUSTMENT FINISHED.
OK
12
