3 - 3
Description of Operation > Description of Newly Adapted Technology
3-2-2 SLEEP/RESTART button (SLEEP status)
Pressing the SLEEP/RESTART button in the recording pause status
will transfer the DVD video camera/recorder to the SLEEP status.
The “SLEEP status” refers to the status in which the recording pause
status is maintained using minimum power. In the ordinary recording
pause status, the LCD monitor or viewfi nder is left on, but it is off in
SLEEP status.
The SLEEP status will be held up to approx.
30 minutes regardless of the Power Save setting; after 30 minutes, the
DVD video camera/recorder will turn off.
There are two ways to release the SLEEP status and restart recording:
•Press the SLEEP/RESTART button, and then press the RECORD
button.
•Press the RECORD button twice.
Set the power switch to OFF to release the SLEEP status and turn the
DVD video camera/recorder off.
3-2-3 Still capturing function
This function records an image of movie being played back on SD
memory card as a still (JPEG).
Perform the following during playback of movie. The DVD video
camera/recorder will enter the playback pause status and shift to the
still capturing mode:
•Press the PHOTO button.
•Press the MENU button, and then choose and execute “Edit” –
“PHOTO Capture” in playback menu.
The number of pixels for a still captured from a 4:3 movie will be 640 (H)
x 480 (V); that for a still captured from a 16:9 movie will be 640 (H) x
360 (V).
3,%%02%34!24
"544/.
0(/4/
"544/.
Fig. 3-2-1
Fig. 3-2-2
