4 - 43
Troubleshooting > Procedure for Removing Disc from Faulty DVD Video Camera/Recorder
4-7 Procedure for Removing Disc from Faulty DVD Video
Camera/Recorder
4-7-1 Items to be checked
Connect the AC adapter/charger or charged battery (power supply), make sure that the ACCESS
indicator turns off, and then press the DISC EJECT button again.
Even with normal product, the disc cannot be removed while the ACCESS indicator is lit or
blinking.
Information:
Be sure to connect the AC adapter/charger or charged battery pack (power supply) before pressing
the DISC EJECT button.
The DISC EJECT button will not work unless a power supply is connected.
4-7-2 How to remove disc
If the disc cannot be removed after performing “4-7-1 Items to be checked”, remove it using the
procedure in this section.
Cautions
Laser light striking the eye may cause your eyesight to be lost: For safety, be sure to remove any power
supply (AC adapter/charger, battery, etc.) from the DVD video camera/recorder before starting work.
Information:
1) The DZ-GX20MA is used for explanation in this section.
Although the shapes of parts are slightly different for
each model, the procedure is identical for all models.
2) Numbers in the procedural diagram are step numbers of
procedure, and letters in brackets [ ] show the types of
screw.
1) Remove screw [B].
2) Remove the top cover in the direction of the arrow.
3) Use a fine-tipped flat-bladed screwdriver, etc. to move
the lock slider in the direction of the arrow, and then
open the disc cover.
4) After removing the disc, close the disc cover.
When reassembling the removed parts, use the reverse
procedure to removal.
Fig. 4-7-1 How to remove disc
[B] M1.7×2.5
(Black)
1) Screw [B]
2)
Top cover
Lock slider
Accessory shoe
3)
