4 - 2
4-2 Messages and Troubleshooting
Some messages may appear on the LCD screen or in the view
fi
nder during operation. If a message
appears, check the following, and then perform the appropriate action, according to the message
content:
1) Is the disc bottom/surface reversed when using a single-sided DVD?
If so, reload the disc properly.
2) Is there any condensation on the lens or in the DVD drive unit,HDD of DVD video camera/recorder?
Condensation will occur when the DVD video camera/recorder is moved from a cold place to a warm place,
e.g. If condensation occurs, set the power switch to “OFF” with the DVD loaded, and then leave the DVD
video camera/recorder in a dry place until condensation disappears (for 1-2 or more hours).
The messages divided using broken lines in the table can be displayed in sequence from the upper
row by pressing the
button.
Troubleshooting > Messages and Troubleshooting
Message
Cause/condition for
message to appear
Troubleshooting
Auto
fi
nalizing…
Plaese wait…
Appears if the DISC EJECT button is
pressed after recording on a +RW ends.
Also appears if the DISC EJECT button
is pressed after a scene recorded on a
+RW is deleted.
Operate the DVD video camera/
recorder when the message
disappears and
fi
nalizing ends.
Cannot combine scene.
Appears if an attempt is made to combine
unconnected scenes: The speci
fi
cations
state that combining of only multiple
scenes is possible.
Stop trying to combine scenes, or
create a play list containing the
scenes to be combined, and combine
them on the play list.
Cannot combine scene of
multiple programs.
Create Playlist
fi
rst,
and then combine scenes.
Appears when combining the scenes in
different programs was attempted.
When combining those scenes,
fi
rst
create a play list, and then combine
the scenes on it.
Cannot combine.
Deselect PHOTO scenes.
Appears if an attempt is made to combine
scenes when a photo was selected: The
speci
fi
cation state that combining of only
video scenes is possible.
Select only video scenes, or stop
trying to combine scenes.
Cannot combine.
Select multiple scenes.
Appears when combining one scene was
attempted.
Select multiple scenes and then
combine them.
Cannot delete scenes.
Appears when user performed deletion
at the upper limit of 999 scenes
registered.
[Refer to *1 page 4-13]
Combine divided scenes, and then
delete if necessary.
[Refer to *2 page 4-13]
Cannot divide scenes
Appears if an attempt is made to divide
an very short scene. If division of scenes
is repeated, an extremely short scene
may be generated.
Give up the division of scene.
Cannot execute.
Change display
category to All.
Appears when combining or moving
scenes was instructed with “Category:
Movie or Still” speci
fi
ed.
Specify “Category: All”, and then
operate the DVD video camera/
recorder again.
Cannot execute.
Unselect multiple scenes.
Appears if an attempt is made to
select multiple scenes for division: The
speci
fi
cations state that dividing multiple
scenes is impossible.
Divide scenes one by one.
