109
1<>2/3
Go To
From the Disc Navigation screen, you can jump to the first scene or last scene, and playback will
start from that point.
MOVING TO BEGINNING (END) OF HDD/DVD/CARD
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
3
Use the
f
/
e
/
d
/
c
/
A
buttons to
choose “Top” or “End” on the “Go To” menu
screen, and then press the
A
button.
4
Press the
A
button to start playback.
HDD/DVD/Card Management
1<>/3
INITIALIZING HDD/DVD/CARD
Initializing the HDD, a DVD-RAM/DVD-RW/+RW or card will allow you to delete any recorded
contents. Before using a DVD-RW/+RW on this video camera/recorder, you must format it.
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
3
Use the
f
/
e
/
d
/
c
/
A
buttons to
choose “Format HDD”, “Format DVD” or
“Format Card” on the “HDD Setting”, “DVD
Setting” or “Card” menu screen, and then
press the
A
button.
The screen for verifying “Format HDD”,
“Format DVD” or “Format Card” will appear.
4
Choose “YES”, and then press the
A
button.
When using DVD-RW, a screen for prompting
you to choose the VF or VR mode will appear.
Choose “NO” to cancel initialization.
Note
:
•
If you wish to delete all recorded contents, it is
recommended that you use initialization, which will
delete all the scenes in much less time than using the
scene delete function.
•
Initialization will delete all the recorded contents on HDD,
disc or card: Be careful not to delete data by mistake.
•
It may not be possible to initialize a disc with many
scratches or dirt: Such a disc cannot be used (p. 10).
•
This DVD video camera/recorder may not recognize
some discs or cards that have been initialized on PC
or a device other than this DVD video camera/
recorder.
•
If you attempt to initialize a disc or card in this DVD
video camera/recorder when it is connected to PC via
PC connection cable, the disc or card may not be
initialized and may be unusable on this DVD video
camera/recorder.
•
If you choose the VR mode when initializing a
finalized DVD-RW (VR-mode), the finalization will not
be released. (The DVD-RW will be a finalized disc
without any recorded data, and recording will be
possible on it.)
Choosing the VF mode will release the finalization of
the disc.
HDD
HDD
Before You Begin
•
Be sure to use the AC adapter/charger to power the DVD video camera/
recorder for initialization. If the DVD video camera/recorder is turned off
during initialization and the initialization is interrupted, incorrect
initialization will result and the incorrectly initialized disc will be
unusable.
•
If you insert a brand-new DVD-RW/+RW, message “DVD is not
formatted” will appear: Initialize the disc, following the subsequent
messages (p. 41).
HDD
HDD
