143
Cannot combine scene
of multiple programs.
Create PlayList first,
and then combine
scenes.
Scenes in different programs (different recording dates) cannot
be combined. Create a Playlist first, and then combine such
scenes on the playlist.
Cannot combine.
Deselect PHOTO
scenes.
Select only movies and combine them.
Cannot combine. Select
multiple scenes.
Select a range of at least 2 scenes to be combined, and then
combine them.
Cannot delete scenes.
This may occur when scene that was edited for division, etc. is to
be deleted.
Combine the divided scenes, and then delete them.
Cannot divide scene.
This message will appear when the scene is extremely short
because division, etc. was repeated.
Cannot execute.
Change display
category to ALL.
This message will appear if you attempt to combine or move
scenes with “Category: VIDEO or PHOTO” specified.
Cannot execute.
Unselect multiple
scenes.
Division or change in thumbnail was executed when multiple
scenes were selected.
Cannot finalize DVD in
HDD mode. Please
finalize DVD in DVD
mode.
This message will appear if you press the FINALIZE button when
the power switch is set to “HDD”. Set the power switch to “DVD”,
and then finalize the disc.
Cannot read DVD.
Check dirt/crack/both-
sides contrary/inserted
correctly.
Error occurred while the disc was being recognized. Make sure
that there is no scratch or dirt on disc, that the surface/back of
disc is not reversed, and that the disc is firmly pushed against the
turntable. See *3 and *4 on page 148.
CANNOT RECORD
PHOTOS
•
This message will appear when the PHOTO/SELECT button is
pressed with the power switch set to “HDD” or “DVD”.
•
No photo can be recorded on the HDD or disc in this DVD
video camera/recorder: Use a card to record photos.
CANNOT RECORD
VIDEO
This message will appear when the REC button is pressed with
the power switch set to “SD”.
Cannot replace
thumbnail on PHOTO
scenes.
The thumbnail of a still cannot be changed.
Select a movie.
Cannot select any more
scenes.
The maximum number of selectable scenes is 999.
CANNOT SLEEP
MODE
The DVD video camera/recorder can enter the sleep/restart
status only from the recording pause status. The following
conditions apply:
•
No DVD is loaded in this DVD video camera/recorder but the
power switch is set to “DVD”.
•
No card is loaded in this DVD video camera/recorder but the
power switch is set to “SD”.
•
The HDD, disc or card has no remaining space.
•
The HDD/disc is protected.
CARD ALMOST FULL
Remaining space is only enough to record less than 10 stills.
Delete unnecessary stills and try the card, or use another card.
Message
Cause & Troubleshooting
Reference
page
