145
DVD error has occurred.
Keep DVD inside &
restart.
Disc error could have occurred during editing of scenes.
Turn off the DVD video camera/recorder with the disc being used
in it, connect AC adapter/charger, and then power the DVD video
camera/recorder again. Repair of scenes will be tried.
DVD error has occurred.
Please keep DVD inside
and set power switch to
“DVD”.
This message will appear if disc error has occurred during
dubbing. Connect the AC adapter/charger to DVD video camera/
recorder, and set the power switch to “DVD”: Video file will be
repaired.
DVD error has occurred.
Unfinalizing is not
complete.
This message will appear when disc error occurred during
unfinalization, and unfinalizing disc failed. Replace the disc.
DVD error has occurred.
•
Use another disc.
•
See *3 and *4 on page 148.
•
Mismatch in recording information may be caused by editing
done on some device other than this DVD video camera/
recorder.
Initialize the disc or use another disc.
•
Initializing the disc will erase all data on it.
DVD full. Cannot
execute.
This message will appear if the capacity of the scene selected is
larger than the free space on disc. Select another scene, or use
another DVD.
DVD must be finalized
before it can be played
back on DVD player or
DVD recorder.
•
This message will appear if you remove a DVD-RW (VF-mode)/
DVD-R that has not been finalized from the DVD video camera/
recorder.
•
See *5 on page 148.
Drive overheat. Please
retry later.
The temperature inside the DVD video camera/recorder is too
high, and writing to disc or reading from disc may not be
performed normally.
Turn the DVD video camera/recorder off and wait for a while. The
temperature will be effectively decreased if the DVD video
camera/recorder is placed in a well-ventilated spot.
DVD-R* cannot dub the
scene recorded in STD
mode and 16:9.
With a DVD-RW (VF-mode)/DVD-R/+RW, no video can be
recorded with a combination of movie quality “STD” and 16:9
mode “On”. Replace the disc with a DVD-RAM or DVD-RW (VR-
mode) for dubbing.
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode),
“+RW” will appear when using a +RW.
DVD-R*, Different video
mode, 16:9 and 4:3
mode cannot exist
together.
With a DVD-RW (VF-mode)/DVD-R, the movie quality mode and
16:9 mode cannot be changed in the middle of disc: Change the
movie to be dubbed or replace the disc with a DVD-RAM or DVD-
RW (VR-mode).
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).
DVD-R*, 16:9 mode
cannot be changed,
when Video mode is
STD.
With DVD-RW (VF-mode)/DVD-R/+RW, the setting of 16:9 mode
will not be possible when the Video mode is STD.
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode),
“+RW” will appear when using a +RW.
DVD-R*, Input Source
cannot be changed.
Once a DVD-RW (VF-mode)/DVD-R has been recorded in the
16:9 mode, the input source will not be changeable.
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).
DVD-R*, Video mode
and 16:9 mode cannot
be changed.
With DVD-RW (VF-mode)/DVD-R, the movie quality mode and
16:9 mode once used for recording cannot be changed.
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).
Message
Cause & Troubleshooting
Reference
page
