8
EN
Section 2
Getting Started
Loading the Battery
Before using the camera, please load the supplied Lithium-ion
rechargeable battery.
Insert the battery following to the correct polarity marks ( +
1.
or -).
Close the battery cover
rmly.
2.
Charging the Battery
You must use the supplied AC charger
or USB cable.
Camera must be turned OFF; blinking
light con
rms charging, but light is
constant when charging
has been completed.
Inserting and Removing an SD Card (Optional)
The camera comes with internal memory which allows you to store
pictures and movies. You can expand the memory capacity by
using an optional SD/SDHC memory card.
Insert the memory card into the right position. Please refer to
1.
the
gure.
To remove an installed SD card, press the card inwards to
2.
release it.
When the card pops out, gently remove it from its slot.
3.
Recommended memory capacity: 1GB above.
4.
Note
When a memory card is
tted, movies/pictures are
•
saved on card rather than on the built-in memory.
Protecting Data on an SD Card: SD card is read-only
•
by locking the SD card. No pictures and movies can be
recorded when the SD card is locked. Make sure the
lock is on writeable position before recording any media.
Writeable
position
Write-Protected
Position