132
•
No operation can be
performed because
the ACCESS or
CARD ACCESS
indicator on this DVD
video camera/
recorder remains lit or
blinking.
•
After disc or card is
inserted, it takes
some time until
recording is possible.
In the following cases, it will take more time than usual until
operation is possible:
•
Immediately after a disc or card is reinserted.
•
When a long time has elapsed since the DVD video camera/
recorder was turned off last.
•
When the temperature is greatly different from the status of
previous recording.
•
When disc with scratches, dirt or fingerprints is inserted.
•
When disc is subject to severe vibrations.
•
When the battery or DC power cord was disconnected instead
of following the correct procedure using power switch to turn
the DVD video camera/recorder off.
8, 49
No image in viewfinder.
•
Is LCD monitor open?
No image will appear in viewfinder unless the LCD monitor is
closed and securely locked to DVD video camera/recorder.
•
Is the DVD video camera/recorder set to the sleep/restart
status?
Press the SLEEP/RESTART button to release the sleep/restart
status.
43, 54
No image appears on
the LCD screen or in
the viewfinder.
•
Does DVD video camera/recorder stop at the end of the scene
to which wipe-out was set and played back?
Press the DISC NAVIGATION button.
•
Is the DVD video camera/recorder set to the sleep/restart
status?
Press the SLEEP/RESTART button to release the sleep/restart
status.
54, 92
Symptom
Cause and Corre
c
tion
Referen
c
e
page