!!"
Tip on SAMPLE CLOCK adjustment (using detailed image)
"
Fill the screen with small characters. Or when Windows 2000 PC is used, select “Shut Down” in
the “start” menu (It is not necessary to actually terminate Windows. When “SHUT DOWN” is
selected, a small check pattern will appear on screen).
If the size adjustment is incomplete, stripes will appear on screen vertically. Use “SAMPLE
CLOCK” to adjust so that vertical stripes disappear. (See p.17
#
18)
"
"
"
"
When displaying analog computer signal
"
"
1. Signal connection
Connect the computer signal to the RGB1 or RGB2 input terminal.
2. Adjustment procedure
$
Select the input to which the signal is connected.
%
Press the RGB key on remote control.
When the input is selected, RGB1, RGB2 or RGB3 will appear on screen.
If the image does not normally appear even when the input to which the signal has been
connected is selected, or “NO SIGNAL” or “SYNC IS OUT OF RANGE” appears, consult your
dealer.
&
Use the remote control to adjust the following items, so that the position and size of displayed
image are correct.
%'
SAMPLE CLOCK
(
(See p.17
#
18)
%'
POSITION
(" " "
(See p.17
#
18)
"
"
)
Adjust the phase of image.
"
Finely adjusting the phase of image will display a sharp image.
"
%
Use the “SAMPLE PHASE” adjustment to adjust so that small characters and vertical lines are
brightest.(See p.17
#
18)
"
%
If the “SAMPLE PHASE” value which makes the small characters and vertical lines brightest
varies depending on the portion of screen, there may be a problem in “SAMPLE CLOCK”
adjustment.
"
"
"
"
"
"
"
"
"
"
"
*
Adjust the brightness.
"
%
To brighten or darken the image, adjust “PICTURE”. (See p.17
#
18)
"
%
To adjust the dark portion of image, adjust “BLACK LEVEL”. (See p.17
#
18)
"
"
+
Adjust the color.
"
,
To adjust the color, select ”COLOR BALANCE” . (See p.17
#
18)
"
If the image is bluish, select “B ADJ.” and use the
-
key to darken blue.
If the image is reddish, select “R ADJ.” and use the
-
key to darken red.
If the image is yellowish, select “B ADJ.” and use the
.
key to brighten blue.
If the image is light bluish, select “R ADJ.” and use the
.
key to brighten red.
"
"
"
Signal Connections and Adjustment Procedures:
Computer Signal