54
Chapter 1 Error Codes
6010 9021
The Port Setting process has not completed. Do you
want to continue for other ports?
To continue the process, select OK. After the
process, reexecute the setting for the port which
is not in operation.
W 5
6010 9022
WARNING: Initial copy mode 'None' is selected for
some volume pairs. Are you sure that the M-VOL and
the R-VOL of these pairs are already synchronized?
Check the contents of the main and remote
volumes. If the contents match, select OK. If not,
select Cancel.
W 0
6010 9023
Are you sure you want to output pair status into a
snapshot file? (Warning: Snapshot file will be
overwritten.)
If you reexecute snapshot by overwriting the
existing snapshot, select OK. If you need to
migrate the existing snapshot, select Cancel.
And retry after the migration.
W 0
6010 9024
Are you sure you want to exchange the specified ports
?Please confirm the concerned channel paths are off-
line.
The same as the message.
W
5
6010 9025
Are you sure you want to exchange the specified ports
?The concerned paths should be deleted before the
operation.
The same as the message.
W
5
6010 9070
Are you sure you want to delete the specified RCUs? If you want to delete the specified RCU, select
OK. If not, select Cancel.
I 0
6010 9071
Are you sure you want to delete the paths of a
specified RCU?
If you want to delete the specified path, select
OK. If not, select Cancel.
I 0
6010 9072
Are you sure you want to delete the specified volume
pairs?
If you want to delete the specified pair, select
OK. If not, select Cancel.
I 0
6010 9073
Are you sure you want to suspend the specified
volume pairs?
If you want to suspend the specified pair, select
OK. If not, select Cancel.
I 0
6010 9074
Are you sure you want to erase data on the R-VOL?
If you want to delete the contents of the remote
volume, select OK. If not, select Cancel.
I 0
6010 9075
Are you sure you want to delete the SSIDs of a
specified RCU?
If you want to delete the specified SSID, select
OK. If not, select Cancel.
I 0
6010 9076
Are you sure you want to delete the specified CT
groups?
If you want to delete the specified CT group,
select OK. If not, select Cancel.
I 0
6010 9100
Do you want to exit?
If you want to exit the screen, select OK. If not,
select Cancel.
I 0
6010 9101
Do you want to cancel?
To cancel, press the OK button.
I
0
6010 9102
Do you want to apply?
To execute the operation in Preset, press the OK
button.
I 0
6010 9103
Do you want to change?
Not used.
I
0
6010 9104
Do you want to change the mode?
If you want to switch the mode, select OK. If not,
select Cancel.
I 0
6010 9105
The value has been changed: but the server cannot
reflect the value. Do you want to exit?
If you want to exit the screen by destroying the
setting data, select OK. If not, select Cancel.
I 0
6010 9106
The value has been changed: but the server cannot
reflect the value. Do you want to change the mode?
If you want to switch the View mode by
destroying the setting data, select OK. If not,
select Cancel.
I 0
6010 9107
The value has been changed: but the server cannot
apply the value. Do you want to continue?
If you want to refresh the screen by destroying
the setting data, select OK. If not, select Cancel.
I 0
6010 9111
Do you want to omit?
If you want to destroy the setting data, select OK.
If not, select Cancel.
W 0
Summary of Contents for Freedom Storage Lightning 9900 V series
Page 1: ...Hitachi Freedom Storage Lightning 9900 V Series Remote Console Error Codes ...
Page 2: ......
Page 6: ...vi Preface ...
Page 8: ...viii Contents ...
