Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-60
GR2K-GA-0014
Ver. 07-02
Changing only the operation designation.
[set] flow qos <Interface Name> {in | out} list <List No.> -action
[ {-upc <kbps> [-upc_burst <Byte>]}
| {[-max_rate <kbps> [-max_rate_burst <Byte>]]
[-min_rate <kbps> [-min_rate_burst <Byte>]]} ]
[-index <No.>]
[-replace_exp <Value>]
[-replace_user_priority <No.>]
[ { [-priority <No.>][-discard <No.>][{-penalty_drop | -penalty_discard
<No.> | -group <No.>}] }
| { -replace_dscp <DSCP_Value> [{-penalty_drop | -penalty_dscp
<DSCP_Value>}] }
| { -dscp_map [{-penalty_drop | -penalty_dscp <DSCP_Value>}] }] ]
Deletion of the information
delete flow qos <Interface Name> {in | out} [list <List No.>]
Indication of the information
show flow qos [<Interface Name> [{in | out} [list <List No.>]]]
Indication of a blank list number in the specified range
show flow qos <Interface Name> {in | out} [list <List No.>-<List No.>]
free
Indication of top blank list number in the specified range
show flow qos <Interface Name> {in | out} [list <List No.>-<List No.>]
free min_no
Parameters
The operation parameters are also decided with parameters that can be set according
to the kinds of operations. The table below shows the parameters that can be set by
operations.