Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-76
GR2K-GA-0014
Ver. 07-02
Contract band specification:
Specifies to monitor traffics from end users by using ISP and discard the
packets breaching the contract band. Specifies that packets with the
interface name of Tokyo and the transmitter address of 10.10.10.0/24 to be
monitored in the contract band of 128 kbit/s.
Specification of queuing priority when contract band is breached:
Specifies that packets breaching the contract band be discarded more easily
when the output lines are congested. Monitors the packets with the interface
name of Tokyo and the transmitter address of 10.10.10.0/24 in the contract
band of 5,000 kbit/s and changes the queuing priority to one at breach.
Specifying the maximum band restr minimum band assurance:
Sets the maximum band restriction and the minimum band assurance by
each end user by using ISP. Specifies the users with the interface name of
Tokyo and the transmitter addresses of 10.10.10.1 and 10.10.10.2 with the
maximum band restriction band of 128 kbit/s and the minimum band
assurance band of 64 kbit/s.
(config)# flow qos Tokyo in list 1 ip 10.10.10.2 any action upc 128
(config)# flow yes
(config)# show flow
flow yes {
qos Tokyo in {
list 1 ip 10.10.10.2 any action upc 128;
};
};
(config)#
(config)# flow qos Tokyo in list 1 ip 10.10.10.0/24 any -action -upc 5000
penalty_di
scard 1
(config)# flow -yes
(config)# show flow
flow yes {
qos Tokyo in {
list 1 ip 10.10.10.0/24 any action upc 5000 penalty_discard
1;
};
};
(config)#
(config)# flow qos Tokyo out list 1 ip any 10.10.10.1 -action -max_rate
128 -min_ra
te 64
(config)# flow qos Tokyo out list 2 ip any 10.10.10.2 -action -max_rate
128 -min_ra
te 64
(config)# flow -yes
(config)# show flow
flow yes {
qos Tokyo out {
list 1 ip any 10.10.10.1 action max_rate 128 min_rate 64;
list 2 ip any 10.10.10.2 action max_rate 128 min_rate 64;
};
};
(config)#