Filtering/QoS Information
GR2K-GA-0014
1-89
Ver. 07-02
Default:
Default is possible only in the indicated case. All the lists are
displayed at default.
Range of value:
1 to 20,000 (ten-decimals)
[list <List No.>-list <list No.>]
Description:
The range of the list number to be treated for display
corresponds to the whole list number including IPv4 QoS and
IPv6 QoS lists.
Default:
The range of the list number to be displayed corresponds to all
list numbers.
Range of value:
IPv4 QoS list:
1-20000 (decimal)
IPv6 QoS list:
40001-60000 (decimal)
fee
Description:
Displays the blank list number.
Default:
Cannot be omitted when the blank list number is displayed.
min_no
Description:
Displays the top blank list number in the specified range.
Default:
Cannot be omitted when the top list number of a blank list
number is displayed.
Flow Detecting Condition Parameters
{ ip | <protocol No.> | tcp | udp | icmp6 }
Description:
Specifies the high-order protocol number of the protocol name.
If all the protocols are taken as the object, ip is specified.
Default:
No default is possible.
Range of value:
0 to 255 (ten-decimals). (refer to Table 1-48.) In the case of an
IPv6 QoS list, protocol numbers that show the IPv6 option
header cannot be designated. Specifically, they are 0 (relay
point option header), 43 (route control header), 44 (fragment
header) and 60 (terminal point option).
Table 1-48 General Protocol Number
Protocol No.
Protocol
1
ICMP
6
TCP
8
EGP
17
UDP
58
ICMPv6
88
IGRP
89
OSPF