Filtering/QoS Information
GR2K-GA-0014
1-111
Ver. 07-02
To show the first free entry No.:
show filter-list free min_no
Parameters
Filters can be set based on information in the TCP, UDP, ICMP, IGMP packets. See
Table Table 1-56 for a list of parameters and conditions.
<Filter List No.>
Description:
Specifies the filter list number.
Default:
Undefined (mandatory input except when used with
show
subcommand).
Range of value:
1-1024
Table 1-56 Applicable Parameters by Upper Protocol
Parameter
TCP
UDP
ICMP
IGMP
Undefined
Filter list no.
§
§
§
§
§
-forward | -drop
u
u
u
u
u
-protocol <No.>
6
17
1
2
°
-payload_length_upper_limit <Payload Length> |
-payload_length_lower_limit <Payload Length>
°
°
°
°
°
-tos <Value>
°
°
°
°
°
-ip_pair | -ip_pair_off
u
u
u
u
u
-ip_source <IP Address> [-<IP Address> | mask
<Subnet Mask> | masklen <Subnet Mask Bit Length>
| /<Subnet Mask Bit Length>]
°
°
°
°
°
-ip_destination <IP Address> [-<IP Address> | mask
<Subnet Mask> | masklen <Subnet Mask Bit Length>
| /<Subnet Mask Bit Length>]
°
°
°
°
°
-port_pair | -port_pair_off
u
u
-port_source <Port No.> [-<Port No.>]
°
°
-port_destination <Port No.> [-<Port No.>
°
°
-pair_synchronized_off | -pair_synchronized
u
u
-ack_check_off | -ack_check
u
-syn_check_off | -syn_check
u
-icmp_type <No.>
°
-icmp_code <No.>
°
-igmp_type <No.>
°
-branch_index <No.>
°
°
°
°
°
-policy_routing <Interface Name> <IP Address>
°
°
°
°
°
policy_routing-group <policy-Group-Name>-
°
°
°
°
°
-replace_tos <New Tos>
°
°
°
°
°
§=must be set
°=can be set
u=can be set; default when omitted
No symbol =cannot be set
Number=set number