Filtering/QoS Information
GR2K-GA-0014
1-135
Ver. 07-02
-yes
: enable
Default:
no
[-cops]
Description:
This parameter uses all interfaces by a COPS function.
Default:
None (All interfaces are not used by a COPS function.)
-wan_length_mode { short | long}
Description:
Designates in the device unit the length of a hardware queue
that is used in frame transmission to WAN lines smaller than 6
M bit/s (serial, BRI, PRI, J2, BRIISDN, PRIISDN, T1, ED) and
the E3 multiplex line.
Short: Hardware queue length gives the transmission delay
time higher priority.
Long: Hardware queue length gives performance higher
priority.
Default:
Short.
Example
1. Setting QoS parameters
To enable flow control:
(config)#qos yes
(config)#show qos
qos yes;
(config)#