Filtering/QoS Information
GR2K-GA-0014
1-153
Ver. 07-02
routing protocol information, IP multicast routing protocol information, and
MPLS information are reflected to the operation.
8. When the queue mode is set to the band control (traffic designation) using this
command, set in the same line so that the total of min_rate for the queue of
which traffic type is guarantee, peak_rate for the queue of which traffic type is
constant, and 192 kbit/s for the queue of which traffic type is not set becomes
less than the maximum transmission band of a line.
9. If addition/deletion/change in the parameters is executed in the qos-queue-list
(QoS attribute) in NE100-STB, communication in all of the lines in the same NIF
is temporarily disabled.
1.2.3
qos-interface
Applies the QoS queue list to an interface. A maximum of 480 entries may be created
for each RP.
Input Format
Setting information
[set] qos-interface {<Line Name> | <DLCI Name> | <Timeslot Name> | <Peer
Name> | <VLAN Name>} -queue_list <Queue-List-Name>
[set] qos-interface <Line Name> -group <No.> -peak_rate <kbps>
[-traffic <Queue No.> -constant -peak_rate <kbps>]
[-traffic <Queue No.> -guarantee -min_rate <kbps>
[-peak_rate <kbps>] [-weight <Rate>]]
[set] qos-interface <VLAN Name> -peak_rate <kbps>
[-traffic <Queue No.> -constant -peak_rate <kbps>]
[-traffic <Queue No.> -guarantee -min_rate <kbps>
[-peak_rate <kbps>] [-weight <Rate>]]
Modifying information
[set] qos-interface {<Line Name> | <DLCI Name> | <Timeslot Name> | <Peer
Name> | <VLAN Name>} -queue_list <Queue-List-Name>
Table 1-74 Relationship Between Priority Determination Among Minimum Bandwidth
Guarantee (kbit/s), Band Control (Traffic Designation), and Flow Control
Method for Deciding
Priority in Flow Control
Subject
Configuration
Command
Subject
Parameter
Advisability of Executing Functions of the
Minimum Bandwidth Guarantee (kbit/s
designation), and Band Control (Traffic
Designation)
Designation for out put
priority
qos-ip-list
priority_class
√
flow qos
priority
√
Designation for DSCP
rewritten value
filter-list
replace_tos
x
qos-ip-list
replace_tos
x
flow filter
replace_dscp
x
flow qos
replace_tos
x
Designation for input
packet DSCP value
qos-ip-list
tos-map
x
flow qos
tos-map
x
√
:
Execution possible
x :
Execution impossible.
(*1): Only PR-A1 can be executed.