Filtering/QoS Information
GR2K-GA-0014
1-169
Ver. 07-02
Displaying the first free entry No.
show qos-ip-list free min_no
TCP, UDP, and other upper level protocols specify the configurable parameters for
flow detection, whereas the flow control parameters that can be configured depend
on the type of flow-control process used. The following tables illustrate the
configurable parameters for flow detection that are supported by various upper-level
protocols, and the flow-control parameters that are supported by different
flow-control methods. IP QoS settings are generated by selecting one parameter type
from the flow-detection parameter table (see Table 1-82) and one from the
flow-control type parameter table (see Table 1-83 to create one entry.
Table 1-82 Configurable Parameters for Flow Detection by Upper-level Protocol
Flow-Detection Parameter
Upper-Level Protocol
TCP
UDP
ICMP
IGMP
Unspecified
Other
<IP List No.>
††
††
††
††
††
††
-protocol <No.>
6
17
1
2
†
{-payload_length_upper_limit |
-payload_length_lower_limit}
<Payload Length>
†
†
†
†
†
†
-tos <Value>
†
†
†
†
†
†
{-ip_pair | -ip_pair_off}
*
*
*
*
*
*
-ip_source <IP Address> -<IP Address> | mask
<Subnet Mask> | masklen <Subnet Mask Bit Length> |
/<Subnet Mask Bit Lendth>]
†
†
†
†
†
†
-ip_destination <IP Address> -<IP Address> | mask
<Subnet Mask> | masklen <Subnet Mask Bit Length> |
/<Subnet Mask Bit Lendth>]
†
†
†
†
†
†
{-port_pair | -port_pair_off}
*
*
-port_source <Port No.> [-<Port No.>]
†
†
-port_destination <Port No.> [-<Port No.>]
†
†
{-pair_synchronized_off | -pair_synchronized}
*
*
-icmp_type <No.>
†
-icmp_code <No.>
†
-igmp_type <No.>
†
††:
required,
†:
configurable,
*:
configurable; default,
blank:
not configurable,
numeral:
numeric setting