Filtering/QoS Information
GR2K-GA-0014
1-207
Ver. 07-02
5. Deleting parameters:
To delete the discard-class of interface name office 1.
Related Commands
qos
qos-queue-list
qos-interface
qos-discard-mode
ipx-interface
Precaution
If this command is inputted in the cases where changes are made on the IP routing
protocol information, the IP multicast protocol information, and the MPLS
information, and the
apply
command is not being executed, the
apply
subcommand is
executed before the command is executed, and the changed IP routing protocol
information, IP multicast routing protocol information, and MPLS information are
reflected to the operation.
1.2.10
qos-bridge
Sets the QoS settings. A maximum of 160 entries can be generated per device.
Input Format
Settings
[set] qos-bridge {<Line Name> | <DLCI Name> | <VC Name> |
<Group Name> | <Timeslot Name> | <Peer Name> }
[-priority_class <No.>],[-discard_class <No.>]
Change settings
[set] qos-bridge {<Line Name> | <DLCI Name> | <VC Name> |
<Group Name> | <Timeslot Name> | <Peer Name> }
[-priority_class <No.>],[-discard_class <No.>]
Delete settings
delete qos-bridge {<Line Name> | <DLCI Name> | <VC Name> |
<Group Name> | <Timeslot Name> | <Peer Name> }
Display settings
show qos-bridge [{<Line Name> | <DLCI Name> | <VC Name> |
<Group Name> | <Timeslot Name> | <Peer Name> ]
(config)# show qos-ipx
qos_ipx office1 priority_class 3 discard_class 2 ;
(config)# delete qos-ipx office1 -discard_class
(config)# show qos-ipx
qos_ipx office2 priority_class 4 ;
(config)#