Filtering/QoS Information
GR2K-GA-0014
1-209
Ver. 07-02
3. Displaying settings:
a. To display all:
b. To display the optional interface name:
4. Deleting settings:
To delete the settings of the interface named
office1
.
5. Deleting parameters:
To delete the discard_class of interface name office 1.
Related Commands
qos
qos-queue-list
qos-interface
qos-discard-mode
bridge-interface
Precaution
If this command is inputted in the cases where changes are made on the IP routing
protocol information, the IP multicast protocol information, and the MPLS
information, and the
apply
command is not being executed, the
apply
subcommand is
executed before the command is executed, and the changed IP routing protocol
information, IP multicast routing protocol information, and MPLS information are
reflected to the operation.
1.2.11
qos-hdlc-passthrough
Establish HDLC passthrough QoS settings. A maximum of 160 entries can be
generated per device.
(config)# show qos-bridge
qos_bridge office1 priority_class 3 discard_class 2 ;
qos_bridge office2 priority_class 4 discard_class 2 ;
(config)#
(config)# show qos-bridge office1
qos_bridge office1 priority_class 3 discard_class 2 ;
(config)#
(config)# show qos-bridge
qos_bridge office1 priority_class 3 discard_class 2 ;
qos_bridge office2 priority_class 4 discard_class 2 ;
(config)# delete qos-bridge office1
(config)# show qos-bridge
qos_bridge office2 priority_class 4 discard_class 2 ;
(config)#
(config)# show qos-bridge
qos_bridge office1 priority_class 3 discard_class 2
;
(config)# delete qos-bridge office1 -discard_class
(config)# show qos-bridge
qos_bridge office2 priority_class 4 ;
(config)#