Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-210
GR2K-GA-0014
Ver. 07-02
Input Format
Settings
[set] qos-hdlc-passthrough {<Line Name> | <DLCI Name> | <VC Name> | <Group
Name> | <Timeslot Name> | <Peer Name> } [-priority_class <No.>]
[-discard_class <No.>]
Changing settings:
[set] qos-hdlc-passthrough {<Line Name> | <DLCI Name>| <VC Name> | <Group
Name> | <Timeslot Name> | <Peer Name> } [-priority_class <No.>
[-discard_class <No.>]
Deleting settings:
delete qos-hdlc-passthrough {<Line Name> | <DLCI Name>| <VC Name> | <Group
Name> | <Timeslot Name> | <Peer Name>}
Displaying settings:
show qos-hdlc-passthrough [{<Line Name> | <DLCI Name>| <VC Name> | <Group
Name> | <Timeslot Name> | <Peer Name>}]
Parameters
{ <Line Name> | <DLCI Name>
| <VC Name>
| <Group Name> | <Timeslot Name> |
<Peer Name> }
Description:
This parameter sets the relevant interface name established in
the bridge interface settings. (Before entering this command,
establish the bridge interface settings.) Only a WAN interface
can be specified. The HDLC passthrough QoS information of
LAN and ATM interfaces operates with the value set using
qos-bridge
.
Default:
Cannot be omitted
-priority_class <No.>
Description:
This parameter sets the output priority class. In the case of
output priority control, used as the output priority class. In
the case of bandwidth and round-robin, used as a queue
number.
Default:
4
Range of value:
1-8
-discard_class <No.>
Description:
This parameter sets the queuing priority class.
Default:
4
Range of value:
1-4