Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
2-6
GR2K-GA-0014
Ver. 07-02
ethernet802_3_network_address <IPX Address>
Description:
This parameter specifies the network address in an 8-digit
hexadecimal number used by the Ethernet interface according
to the IEEE802.3 standard. It is only valid when the relevant
interface is Ethernet.
<IPX Address>
:
Specify the pertinent network address.
Default:
None
Range of value:
1-0xfffffffe
in
<IPX Address>
ethernet2_network_address <IPX Address>
Description:
This parameter specifies the network address used by the
interface according to the standard of Ethernet V2.0, in an
8-digit hexadecimal number. It is only valid when the relevant
interface is Ethernet.
<IPX Address>
:
Specify the pertinent network address.
Default:
None
Range of value:
1-0xfffffffe in <IPX Address>
llc_network_address <IPX Address>
Description:
This parameter specifies the network address used with LLC in
an 8-digit hexadecimal number. It is only valid when the
relevant interface is Ethernet.
<IPX Address>
:
Specify the pertinent network address.
Default:
None
Range of value:
1-0xfffffffe
snap_network_address <IPX Address>
Description:
This parameter specifies the network address used with SNAP
in an 8-digit hexadecimal number. It is only valid when the
relevant interface is Ethernet.
<IPX Address>
:
Specify the pertinent network address.
Default:
None
Range of value:
1-0xfffffffe
network_address <IPX Address>
Description:
This parameter specifies the network address assigned to this
interface in an 8-digit hexadecimal number only when the
relevant interface is WAN or ATM.
<IPX Address>
:
Specify the pertinent network address.
Default:
None
Range of value:
1-0xfffffffe