Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
2-14
GR2K-GA-0014
Ver. 07-02
2.1.5
static-sap
This command sets the static SAP information.
Input Format
Setting information
[set] static-sap server_name <Name> type <Type> hops <Hops>
network_address <IPX Address> [-node_address <MAC Address>]
[-socket_number <Socket Number>] next_hop_network <IPX Address>
next_hop_router_address <MAC Address>
Change settings
[set] static-sap <No.> [server_name <Name>] [type <Type>] [hops <Hops>]
[network_address <IPX Address>] [-node_address <MAC Address>]
[-socket_number <Socket Number>] [next_hop_network <IPX Address>]
[next_hop_router_address <MAC Address>]
Insert settings
insert static-sap <No.> server_name <Name> type <Type> hops <Hops>
network_address <IPX Address> [-node_address <MAC Address>]
[-socket_number <Socket Number>] next_hop_network <IPX Address>
next_hop_router_address <MAC Address>
Delete settings
delete static-sap <No.>
Display settings
show static-sap [<No.>]
Parameters
server_name <Name>
Description:
This parameter specifies the registered static server name.
Default:
Cannot be omitted
Range of value:
Maximum of 47 characters.
type <Type>
Description:
This parameter specifies the service type (4-digit hexadecimal
number). The reference values are shown in Table 2-1 below.