Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
2-18
GR2K-GA-0014
Ver. 07-02
6. Deleting parameter
The node_address of SAP information in No. 1 are deleted.
Related Commands
ipx
ipx interface
Precautions
If this command is inputted in the cases where changes are made on the IP routing
protocol information, the IP multicast protocol information, and the MPLS
information, and the
apply
command is not being executed, the
apply
subcommand is
executed before the command is executed, and the changed IP routing protocol
information, IP multicast routing protocol information, and MPLS information are
reflected to the operation.
2.1.6
rip-filtering
This command filters a RIP packet. Filtering can be applied on the input or output
ports.
Input Format
Setting information
[set] rip-filtering [-network <IPX Address>]
[-port_network <IPX Address>] [{ -forward | -drop }]
[{ -output | -input }]
Changing settings
[set] rip-filtering <No.> [-network <IPX Address>]
[-port_network <IPX Address>]
[{ -forward | -drop }] [{ -output | -input }]
(config)# show static-sap 1
sap {
server_name server_x;
type 0011;
hops 1;
network_address 13333333;
node_address 02:22:22:22:22:22:55;
next_hop_network 34444444;
next_hop_router_address 12:33:33:33:33:33;
} ;
(config)# delete static-sap 1 -node_address
config show static-sap 1
sap {
server_name server_x;
type 0011;
hops 1;
network_address 13333333;
next_hop_network 34444444;
next_hop_router_address 12:33:33:33:33:33;
} ;
(config)#