IPX/Bridge Information
GR2K-GA-0014
2-21
Ver. 07-02
6. Deleting parameter
The filtering operation and mode of SAP filtering information in No. 1 are deleted.
Related Commands
ipx
ipx-interface
Precautions
If this command is inputted in the cases where changes are made on the IP routing
protocol information, the IP multicast protocol information, and the MPLS
information, and the
apply
command is not being executed, the
apply
subcommand is
executed before the command is executed, and the changed IP routing protocol
information, IP multicast routing protocol information, and MPLS information are
reflected to the operation.
2.1.7
sap-filtering
This command filters a SAP packet by setting the SAP filtering information. Filtering
can be applied on the input on output ports.
Input Format
Setting information
[set] sap-filtering [-type <Type>] [-server_network <IPX Address>]
[-port_network <IPX Address>] [{ -forward | -drop }]
[{ -output | -input }]
Changing settings
[set] sap-filtering <No.> [-type <Type>]
[-server_network <IPX Address>] [-port_network <IPX Address>]
[{ -forward | -drop }]
[{ -output | -input }]
Inserting settings
insert sap-filtering <No.> [-type <Type>]
[-server_network <IPX Address>] [-port_network <IPX Address>]
[{ -forward | -drop }] [{ -output | -input }]
(config)# show rip-filtering 1
filter {
network 11111111;
port_network 22222222;
forward;
output ;
};
(config)# delete rip-filtering 1 -forward
(config)# delete rip-filtering 1 -output
(config)# show rip-filtering 1
filtering {
network 11111111;
port_network 22222222;
};
(config)#