Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
2-36
GR2K-GA-0014
Ver. 07-02
Displaying
show extended-filtering [<No.>]
Parameters
{ -yes | -no }
Description:
This parameter sets whether you perform extended-filtering:
-
yes
indicates extended filtering, and
no
indicates -no extended
filtering.
Default:
-
no
{ <Line Name> | <DLCI Name> | <VC Name> | <Peer Name> | <Group Name> |
<Timeslot> | all }
Description:
This parameter specifies the name of the interface that
performs extended-filtering. When you specify
all
, all
interfaces perform extended filtering. The DLCI name can be
specified for Frame Relay, and the VC name and group name
can be specified for ATM. The Peer Name can be specified for
ISDN.
Default:
Cannot be omitted
{ -drop | -forward }
Description:
This parameter configures filtering operation:
drop
discards
frames that match the filtering conditions, and
forward
relays
frames that match the filtering conditions only to recipients
specified by interface name.
Default:
-
drop
filter1-3 { off | da | sa | dsap | ssap | ctl | oui | pid | type | user }
Description:
Specifies filtering conditions (choose from the list below). You
can configure up to three items; however, only one item can be
set at a time. For example, when configuring three items, first
configure as filter1, then as filter2 and filter3.
off
:
No information
da
:
Recipient MAC address (6 octet)
sa
:
Sender MAC address (6 octet)
dsap
:
Recipient SAP (1 octet)
ssap
:
Sender SAP (1 octet)
ctl
:
Control field (1 octet)
oui
:
Organization code (3 octet)
pid
:
Protocol ID (2 octet)
type
:
Type field when the format is Ethernet.
user
:
Specifying any user defined fields.
Default:
off