Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
2-38
GR2K-GA-0014
Ver. 07-02
3. Displaying setting information:
a. Display all information:
b. Displaying specific information:
4. Deleting setting information
To delete entry information number 1:
5. Deleting parameters:
To delete the offset of entry information number1.
Related Commands
bridge
bridge-interface
line
Precautions
If this command is inputted in the cases where changes are made on the IP routing
protocol information, the IP multicast protocol information, and the MPLS
information, and the
apply
command is not being executed, the
apply
subcommand is
executed before the command is executed, and the changed IP routing protocol
information, IP multicast routing protocol information, and MPLS information are
reflected to the operation.
(config)# extended-filtering
No.
---- extended-filtering yes {
1 line1 drop {
filter1 ctl value 1 mask 20 length 1 offset 0 ;
} ;
2 line3 forward {
filter1 user value 10 mask 0 length 1 offset 0 ;
} ;
} ;
(config)#
(config)# show extended-filtering 1
line drop {
filter1 ct1 value 1 mask 20 length 1 offset 0 ;
} ;
(config)#
(config)# delete extended-filtering 1
(config)#
(config)# show extended-filtering 1
Department1 drop {
filter1 user value 000000000001 mask ffffffffffff length 1 offset
0 ;
} ;
(config)# delete extended-filtering 1 filter1 -offset
(config)# show extended-filtering 1
Department1 drop {
filter1 user value 000000000001 mask ffffffffffff length 1 ;
} ;