GR2K-GA-0014
3-1
Ver. 07-02
Chapter 3
SNMP Information
3.1
SNMP Objects
The SNMP information objects apply to either SNMP or RMON as shown in Table 3-1
below.
3.1.1
snmp
Function
Object for creation, modification, deletion, and display of SNMP Managers. Up to 20
SNMP Managers can be registered per router. For the supported MIB and support
trap lists, see the GR2000 Operations Guide.
Input Format
To create or modify an SNMP Manager:
[set] snmp <Community Name> <{ SNMP manager IP Address| SNMP manager IPv6
Address }> [{ -read | -read_write }]
[{ -none | -trap | -ex_trap [ -level <Level> ] | -selection_trap }]
[{ -limited_coldstart_trap | -unlimited_coldstart_trap }]
[-link_trap_mode{ -interface | -protocol }]
[-link_trap_bind_info {private | standard}]
[ -trap_version { 1 | 2 }]
[ -bgp_trap ] [ -rmon_trap ] [ -dsx1_trap ] [ -dsx3_trap ] [ -vrrp_trap ]
[ -system_msg_trap [ -level <Level> ] ] [ -standby_system_trap ]
[ -temperature_trap ] [ -atm_pvc_trap ]
Table 3-1
Application of SNMP Information Objects
Category
Purpose
Object
Subsection
SNMP
To register SNMP Manager
snmp
3.1.1
RMON
To set RMON Ethernet history-group control information history-control
3.1.2
To set RMON Ethernet alarm-group information
alarm
3.1.3
To set RMON Ethernet event-group information
event
3.1.4
*
Note: These objects must be used in conjunction with the configuration subcommand.