Operation Management Information
GR2K-GA-0014
4-9
Ver. 07-02
4.2.2
logger-email
Function
Sets information for output log information by e-mail. Up to 64 entries can be set.
Input Format
To set information:
[set] logger email <E-Mail Address> <event level>
To set information:
[set] logger email <E-Mail Address> <event level>
at <HH:MM> [<HH:MM>] [<HH:MM>] [<HH:MM>] [<HH:MM>]
To set information:
[set] logger email <E-Mail Address> <event level> interval <s> <HH:MM>
To delete information:
delete logger email <E-Mail Address> <event level>
To show information:
show logger
Parameter
<E-Mail Address>
Description:
Specifies destination e-mail address. To confirm E-Mail
function of the specified mail address, set key of <event level>
and input any command. If the mail address is normal, mail is
sent whenever a command is entered.
<event level>
Description:
Specifies event level of output log. Specifies either of key, rsp,
rtm, err, evt, mrp, mpl, ip6 or mr6.
at <HH:MM> [<HH:MM>] [<HH:MM>] [<HH:MM>] [<HH:MM>]
Description:
Specifies the time when e-mail is sent. HH is hour. MM is
minute. Up to 5 times can be specified.
interval <s> <HH:MM>
Description:
Specifies interval and starting time of e-mail sending. s is the
interval in second. HH is hour. MM is minute.