Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
4-16
GR2K-GA-0014
Ver. 07-02
smtp { <Host Name> | <IP Address> }
Description:
Specifies the SMTP server host name or IPv4 address for
sending e-mail reports
[-port <Port No.>]
Description:
Specifies the SMTP server port number for sending e-mail
reports
Default:
Standard value
(25)
Range of value:
0 - 655535 (decimal). If set to 0, it operates at the standard
value (25).
email assist
Specifies the e-mail destination maintenance service center. Our GR2000
Product Support Service (PSS) is used by specifying "assist."
<E-Mail Address>
Specifies the destination e-mail address
-manufacturing_number <Mfg No.>
Specifies the code that enables the e-mail destination maintenance service center
to identify the reported device. The manufacturing number of the device is
specified. Refer to Table 4-1, Location of appended manufacturing number seals,
which are appended to the device in the locations indicated below.
Table 4-1
Location of appended manufacturing number seals
Model
Location of appended manufacturing number seals
GR2000-1B
Bottom of the device
GR2000-2B
Bottom of the device
GR2000-2B+
Bottom of the device
GR2000-BH
Bottom of the device
GR2000-2S
Lower right viewed from the front
GR2000-4S
Lower right viewed from the front
GR2000-6H
Lower right viewed from the front
GR2000-10H
Lower left of NIF board insertion surface
GR2000-20H
Lower left of RP board insertion surface
GR2000-4
Lower right viewed from the front
GR2000-10
Lower right of NIF board insertion surface
GR2000-20
Lower left of NIF board insertion surface