Operation Management Information
GR2K-GA-0014
4-17
Ver. 07-02
Example
1. Setting parameters
The destination e-main address used for e-mail reports is set in
nobody@router-1.mydomain.co.jp.
The SMTP server used for e-mail reports is set in loghost.
Setting so that an e-mail report is sent to e-mail address logger@loghost by
device manufacturing number 1234.
2. Changing parameters
Setting the SMTP server used for e-mail reports in loghost port number 10025.
Setting the SMTP server used for e-mail reports in the default value when the
loghost port number is omitted
3. Displaying parameters
Displaying the settings.
4. Deleting parameters
Deleting destination e-mail address definitions.
(config)# report email-from nobody@router-1.mydomain.co.jp
(config)# show report
report yes {
email-from nobody@router-1.mydomain.co.jp;
};
(config)#
(config)# report smtp loghost
(config)# show report
report yes {
email-from nobody@router-1.mydomain.co.jp;
smtp loghost;
};
(config)#
(config)# report email assist logger@loghost -manufacturing_number 1234
(config)# show report
report yes {
email-from nobody@router-1.mydomain.co.jp;
smtp loghost;
email assist logger@loghost manufacturing_number 1234;
};
(config)#
(config)# report smtp loghost -port 10025
report yes {
smtp loghost port 10025;
};
(config)#
(config)# delete report smtp loghost -port
(config)#
(config)# show report
report yes {
email-from nobody@router-1.mydomain.co.jp;
smtp loghost;
email assist logger@loghost manufacturing_number 1234;
};
(config)#
(config)# delete report email assist
Are you sure? (y/n): y
(config)#