Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
4-20
GR2K-GA-0014
Ver. 07-02
4.4
NTP Object - ntp
Function
Object for creation, deletion, and display of the NTP configuration information, i.e.,
the router’s timer setting information in synchronization with the NTP server.
Input Format
To create the NTP configuration information:
[set] ntp peer <address> [-key <key>] [-version { 1 | 2 | 3 }] [-prefer]
[set] ntp server <address> [-key <key>] [-version { 1 | 2 | 3 }] [-prefer]
[set] ntp broadcast <address> [-key <key>] [-version { 1 | 2 | 3 }]
[set] ntp -broadcastclient
[set] ntp trustedkey <key>
[set] ntp restrict <address> [-mask <mask>] [-ignore] [-noquery]
[-nomodify] [-noserve] [-nopeer] [-notrust] [-limited] [-ntpport]
[set] ntp -clientlimit <limit>
[set] ntp -master [-stratum <int>]
[set] ntp -broadcastdelay <seconds>
[set] ntp -authenticate
[set] ntp authentication-key <key> -md5 <value>
To delete the NTP configuration information:
delete ntp peer <address>
delete ntp server <address>
delete ntp broadcast <address>
delete ntp trustedkey <key>
delete ntp authentication-key <key>
To show the NTP configuration information:
show ntp
Parameter
peer <IP Address> [-key <key>] [-version { 1 | 2 | 3 }] [-prefer]
This set of parameters specifies the peer server.
<address>
Description:
Specifies the IP address of the target server as a peer server.
Default:
Undefined (mandatory input).
Range of Value:
IP address in dot notation or host name defined with
hosts
object.
*
Note: This object must be used in conjunction with the configuration subcommand.