Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
4-36
GR2K-GA-0014
Ver. 07-02
4.7.4
Line Information (WAN)
Input Format
[set]
default
[ -e1_frame_format { crc4 | no_crc4 } ]
[ -e1_line_code { ami | hdb3 } ]
[ -e1_clock { external | independent } ]
[ -e1_national_bit_g704 <Pattern> ]
[ -e1_timeslot_speed { 56 | 64 } ]
[ -t3_clock { external | independent } ]
[ -t3_crc { 16 | 32 } ]
[ { -t3_scramble | -t3_scramble_off } ]
[ -t3_location { ci | carrier } ]
[ -t3_remote_loopback { payload Åb line | disable } ]
[ -t3_mdl { pid | tsid | isid | disable } ]
[ -t1_frame_format { esf | sf } ]
[ -t1_line_code { ami | b8zs } ]
[ -t1_clock { external | independent } ]
[ -t1_timeslot_speed { 56 | 64 } ]
[ -t1_location { ci | carrier } ]
[ -t1_data_link { ansi | att | bellcore } ]
[ -t1_remote_loopback { auto | disable } ]
[ -t1_prm { enable | disable } ]
[ -e3_clock { external | independent } ]
[ -e3_national_bit_g751 <Pattern> ]
[ -e3_crc { 16 | 32 } ]
[ {-e3_scramble | -e3_scramble_off } ]
[ -ce3_clock { external | independent } ]
[ -ce3_national_bit_g751 <Pattern> ]
[ -ce3_crc {16 | 32}]
[ -ct3_frame_format { cbit | m23 } ]
[ -ct3_clock { external | independent } ]
[ -ct3_crc {16 | 32}]
Parameters
The initial value items that can be set using line Information (WAN) and the initial
values during initial installation are shown in Table 4-4. For details of each
parameter, refer to the configuration definition information in "line (line Information),
Serial/OC-3c(POS)/ OC-12c(POS)/ OC-48(POS)/ BRI(leased line)/ PRI(leased line)/
J2/ BRI (ISDN)/ PRI (ISDN)/ T1 (leased line)/ E1 (leased line)/ T3 non-multiplex
(leased line)/ E3 non-multiplex (leased line)/ E3 multiplex (leased line)".