Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
4-44
GR2K-GA-0014
Ver. 07-02
4.7.10
Frame Relay Information
Input Format
[set]
default
[ -frame_relay_local_management { q933 | no } ]
[ -frame_relay_poll_direction { dte | dce | both } ]
[ { -frame_relay_provide_single_pvc_status_off |
-frame_relay_provide_single_pvc_status } ]
[ -frame_relay_no_pvc_detection <Seconds> ]
[ -frame_relay_cllm_sustain { no | <Seconds> } ]
[ -frame_relay_max_packet_size <Bytes> ]
[ { -dlci_drop | -dlci_forward } ]
[ -dlci_max_packet_size <Bytes> ]
[ -dlci_peak_rate { no | <kbps> } ]
[ { -dlci_congestion_management_off | -dlci_congestion_management } ]
[ -dlci_cir <kbps> ]
[ { -dlci_ip_outgoing_off | -dlci_ip_outgoing } ]
[ { -dlci_ipx_outgoing_off | -dlci_ipx_outgoing } ]
[ { -dlci_inverse_arp_off | -dlci_inverse_arp } ]
[ { -dlci_provide_arp_off | -dlci-provide_arp } ]
[ -dlci_bc <kBytes> ]
[ -dlci_be <kBytes> ]
[ -dlci_min_access_rate <kbps> ]
[ -dlci_de_packet_class { no | <No.> } ]
Parameters
The initial value items that can be set using frame relay Information and the initial
values during initial installation are shown in Table 4-12, “List of Initial Values That
Can Be Set Using ISDN Information and Initial Values During Initial Installation,” on
page 4-49. For details of each parameter, refer to the configuration definition
information in "frame relay information".