Operation Management Information
GR2K-GA-0014
4-51
Ver. 07-02
4.7.14
IP Interface Information
Input Format
[set] default
[ -ip_arp_ageing_time <Minute> ]
[ -ip_connect_type { point | broad } ]
[ { -ip_proxy_arp_off | -ip_proxy_arp } ]
[ -ip_arp_encapsulation { ethernet | probe } ]
[ -ip_arp_max_send_count { Count } ]
[ -ip_arp__send_interval { Second } ]
[ { -ip_source_route_option_forward | -ip_source_route_option_forward_off
} ]
[ { -ip_icmp_redirects_off | -ip_icmp_redirects }]
[ { -ip_icmp6_redirects_off | -ip_icmp6_redirects }]
[ { -ip_directbroad_forward_off | -ip_directbroad_forward } ]
[ { -ip_subnetbroad_forward_off | -ip_subnetbroad_forward } ]
[ { -ip_icmp6_nodeinfo_query | -ip_icmp6_nodeinfo_query_off }]
[ -ip_rate_limiting <Microsecond> ]
[ -arp_hardware_type { ethernet | ieee802.3 } ]
[ -relay_interface_bootp_hops <Hop> ]
Parameters
The default value items that can be set using IP Information and the default values
during initial installation are shown in Table 4-14. For details of each parameter,
refer to the configuration definition information in "GR2000 Configuration
Commands, (universal CLI) Vol. 1."
Table 4-13 List of Initial Values That Can Be Set Using Tunnel Information and Initial
Values During Initial Installation
Information
Group Name
Information Name
Initial Value
Tunnel
information
Optimizing option of tunnel relay performance
off: -tunnel_optimize_off
Tunnel interface MTU size
1280 octets
Relay limit count during encapsulation
30