Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
4-56
GR2K-GA-0014
Ver. 07-02
4.7.17
Bridge information
Input Format
[set]
default
[-bridge_interface_action {no | spt | yes }]
[-bridge_interface_cost_ <Number> ]
[-bridge_interface_priority <Number> ]
[ { -bridge_interface_enable | bridge_interface_disable }]
[ { -bridge_interface_translation off |
_bridge_interface_translation } ]
[-bridge_extended_filtering_action { no | yes } ]
[-bridge_extended_filtering_type { off | da | dasp | ssap | cti |
oui | pid | type | user }]
[-bridge_extended_filtering_value <Number> ]
[-bridge_extended_filtering_mask <Number> ]
[-bridge_extended_filtering_offset <Number> ]
Parameters
The initial value items that can be set using bridge Information and the initial values
during initial installation are shown in Table 4-17. For details of each parameter,
refer to the configuration definition information in "Section 2.2, “Bridge Objects".
Table 4-17 List of Initial Values That Can Be Set Using IPX Information and Initial
Values During Initial Installation
Information
Group Name
Information Name
Initial Value
Bridge
information
Designation of bridge interface
mode
Operation is disabled. (no)
spt path cost
10
spt priority
128
Bridge interface operation
Possible (bridge_interface_enable)
FDDI translation
Not translated.
(bridge_interface_translation_off)
Extended filtering operation
Operates in drop. (no)
Designation of extended filtering
item
No information is provided. (off)
Extended filtering data value
0x000000000000
Extended filtering mask value
0x000000000000
Extended filtering offset value
0