Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-32
GR2K-GA-0014
Ver. 07-02
[vlan <VLAN ID>]
Description:
Sets the VLAN ID of tag-VLAN.
The list information that sets this parameter should be set in
(Inbound) and specified as the flow detection conditions on the
input side.
Default:
Undefined. (VLAN ID is not contained in the flow detection
conditions.)
Range of value:
1 to 4095 (This parameter is valid only in RP-C and RP-D.)
[<Port_Source>]
Transmitter port numbers are designated.
If port number to be designated is one: nnnnn
If port number is designated by range:nnnnn-nnnnn
Default:
None (the transmitter port number is not included in the flow
detecting condition.)
Range of value:
0 to 65535 (decimal). (Please refer to Table 1-24.)
[<Port_Destination>]
Destination port numbers are designated.
If port number to be designated is one: nnnnn
If port number is designated by range:nnnnn-nnnnn
Default:
None (the transmitter port number is not included in the flow
detecting condition.)
Range of value:
0 to 65535 (decimal). (Please refer to Table 1-24.)
[ack]
TCP single-direction communication permit (having one ACK flag) is
designated.(note1)
Default:
None (the ACK flag is not included in the flow detecting
condition.)
Range of value:
None
[syn]
Virtual circuit establishment permit (having one SYN fla) is designated.(Note1)
Table 1-24 General port number
Port Number (Decimal)
Name
20/tcp
File Transfer [Default Data]
21/tcp
File Transfer [Control]
22/tcp
Secure Shell Login
23/tcp
Telnet
25/tcp
Simple Mail Transfer
53/tcp 53/udp
Domain Name Server
80/tcp
World Wide Web HTTP
110/tcp 10/udp
Post Office Protocol - Version 3
161/udp
SNMP