--- 13 ---
Piston disassembly
Remove the Seal Lock Hex. Socket Hd. Bolts M4 x 12
[43]
fixing the Crank Case Cover
[42]
, then the Crank
Case Cover
[42]
can be removed from the Crank Case
[46]
. Move the Crank Shaft
[40]
to the bottom dead
center then the piston ass'y can be removed from the Crank Shaft
[40]
(Figs. 15 and 16).
Damper washer
Punch
Stopper ring
Damper
Striker
Slide ring
Cylinder
Second hammer
Fig. 13
Fig. 14
Damper holder
Spring hook
Crank case
Connecting rod
Crank case cover
Piston
Crank shaft
Fig. 15
Crank case
Connecting rod
Crank shaft
Fig. 16
Inside cylinder disassembly
Remove the Striker
[33]
and the Slide Ring
[32]
from inside Cylinder
[24]
(Fig. 13). Remove the Stopper Ring
[31]
from the groove inside Cylinder
[24]
by striking the Stopper Ring
[31]
through the hole provided on
Cylinder
[24]
. Next, take out the Stopper Ring
[31]
from inside Cylinder
[24]
by the spring hook (J201,
No. 970977). Then the Damper Holder
[30]
, Damper
[29]
, Damper Washer
[28]
and Second Hammer
[26]
can be removed from the Cylinder
[24]
(Fig. 14).
Summary of Contents for H 25PV
Page 28: ......
