Hitachi H 45M R, Handling Instructions Manual

3

English

GENERAL SAFETY RULES

WARNING!
Read all instructions
Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
The term “ power tool”  in all of the warnings listed below
refers to your mains operated (corded) power tool or battery
operated (cordless) power tool.

SAVE THESE INSTRUCTIONS
1) Work area

a) Keep work area clean and well lit.

Cluttered and dark areas invite accidents.

b) Do not  operat e pow er t ools in explosive

atmospheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks which may ignite the
dust of fumes.

c) Keep children and bystanders away while operating

a power tool.
Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way.
Do not use any adapter plugs w ith earthed
(grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.

c) Do not expose pow er tools to rain or w et

conditions.
Water entering a power tool will increase the risk
of electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of
electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication.
A moment of inattention while operating power
tools may result in serious personal injury.

b) Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal
injuries.

c) Avoid accidental starting. Ensure the switch is in

the off position before plugging in.
Carrying power tools with your finger on the
switch or plugging in power tools that have the
switch on invites accidents.

d) Remove any adjusting key or w rench before

turning the power tool on.
A w rench or a key left attached to a rotating part
of the pow er tool m ay result in personal injury.

e) Do not overreach. Keep proper footing and balance

at all times.
This enables better control of the power tool in
unexpected situations.

f)

Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long hair can be caught
in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these
are connected and properly used.
Use of these devices can reduce dust related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and off.
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.

c) Disconnect the plug from the power source before

making any adjustments, changing accessories, or
storing power tools.
Such preventive safety measures reduce the risk
of starting the power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.
Pow er tools are dangerous in the hands of
untrained users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and
any other condition that may affect the power
tools operation.
If damaged, have the pow er tool repaired before
use.
Many accidents are caused by poorly maintained
power tools.

f)

Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.

g) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed.
Use of the power tool for operations different from
intended could result in a hazardous situation.

5) Service

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.

PRECAUTION
Keep children and infirm persons away.
When not in use, tools should be stored out of reach of
children and infirm persons.